Gardner 7545-GA Manuel d'instructions télécharger pdf (Page 3)

COPYRIGHT © 2009 - 2012, GARDNER-GIBSON, INC.

3

How to seal an asphalt / blacktop driveway

1. Pour ½ the container of sealer onto the

clean blacktop. Work on one small area at a

time, applying a thin coat, brushing away

any excess as you apply the sealer.

2. Apply first coat in one direction, and then

second coat in the opposite direction (see

diagram at right).

3. Work the product across the blacktop with a

brush. Apply in a cross-hatch pattern to

ensure all voids are filled and sealed. Overlap

each section of the sealer as you are applying

it to avoid leaving an edge (see diagram

below).

4. By applying perpendicular to the house, you

will eliminate viewing brush strokes.

Step 3: Apply an asphalt Driveway Sealer

Apply sealer to driveway in

one complete direction

first, working down the

driveway. Be sure each

section overlaps the

previous section, as shown

in the diagram.

Follow-up with a

second coat of

sealer applying it in

the opposite

direction as shown

in the diagram.

OVERLAP EACH PASS

WITH NEXT PASS

First one direction… …then the other

OVERLAP

1 2 3 4

For flat driveways only 4

Commentaires sur ces manuels

Pas de commentaire